grab image then sending it to my PC by using ethernet in dm6437

Ahmet

Intellectual 440 points

Other Parts Discussed in Thread: TMS320DM6437

Hello,

I'm beginner in DM6437 and Code composer studio 3.3.

I'm MsC student.My thesis is based on video stabilisation on DM6437.

Firstly,I could grab a fresh image input frame by using FVID_exchange(hGioVpfeCcdc, &frameBuffPtr).

How can I send image after grab to my PC by using DM6437 ethernet?

Is there a special function in DM6437?How can I overcome of this problem?

Could you help me please?

Best Regards...

over 15 years ago

Paul.Yin over 15 years ago

TI__Genius 14405 points

Hi,

Just wondering, why do you need to send it over Ethernet? wouldn't it be easier to write it to a file directly on the PC?

You are using BIOS correct?

Ahmet over 15 years ago in reply to Paul.Yin

Intellectual 440 points

Firstly, after grabing images and sending it to my PC by using ethernet,I want to do image processing according to my algorithm by using this images on C or matlab editor.and I can obtain result video.

Secondly, simultaneously I will do same image processing operations on dm6437 and sending result video to the TFT LCD monitor.

So I can compare these two results, and make sure of my algoritm if these are same ,another topic I will check my code on CCS 3.3.

Can I be explanatory to my problem?Could you help me please?

Best regards...

David Friedland over 15 years ago in reply to Ahmet

TI__Mastermind 18320 points

Are you using DSP/BIOS? What version?

Are you using the NDK as well?

Bhargavi Vadaliya over 10 years ago

Prodigy 60 points

Hii,
How are u able to take image as input. I am doing project on Image processing using TMS320DM6437 and CCSv5.5, I don't know how take an image as input.

ToddMullanix over 10 years ago in reply to Bhargavi Vadaliya

TI__Guru* 96960 points

This is a pretty old thread. I recommend you post a question to the DaVinci DM64xx forum: http://e2e.ti.com/support/dsp/davinci_digital_media_processors/f/99

Todd

Processors

Processors forum

grab image then sending it to my PC by using ethernet in dm6437