• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 99 subscribers
  • Views 2089 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RTOS: RTC in CC1310

harsha ganegoda
Prodigy 240 points
Other Parts Discussed in Thread: CC1310, SYSBIOS

Tool/software: TI-RTOS

Hi, 

What happen to RTC in CC1310 when I put standby mode to CC1310? Can anyone give me a clear explanation? Are there any example in TI-RTOS to check RTC?

Thank you.

  • 0
    TI__Mastermind 30830 points
    The RTC is used by TI-RTOS as the time base for the ti.sysbios.Clock module. It continues to run even when the processor is in standby mode and will wake the processor whenever a Clock object times out.

    Clock objects are used to implement the timeouts for BIOS APIs such as Task_sleep(), Semaphore_pend(), Event_pend(), etc. They are also used internally by various TI-RTOS driver functions when a timeout is required.

    The RTC is also used as the timebase for the ti.sysbios.hal.Seconds module which can be used to provide time-of-day information to your application.

    Is this enough information?

    Alan
  • 0 in reply to Alan DeMars
    TI__Expert 7250 points
    There was a suggested answer and since there has been no active on this thread for more than a week, the suggested answer was marked as verify. Please feel free to select the "Reject Answer" button and reply with more details.
  • 0 in reply to Alan DeMars
    Prodigy 240 points
    Thank you very much for your explanation.