CCS/66AK2H12: failed to make CCS project by 'pdkProjectCreate.bat'.

Gilbert-Kim

Intellectual 350 points

Part Number: 66AK2H12

Tool/software: Code Composer Studio

Hello.

I have a difficulty to make C66 project by 'pdkProjectCreate.bat'

after set PATH environments, run 'pdkProjectCreate.bat' as follows.

PDK version: pdk_k2hk_4_0_3

CCS version: 7.0.0.00042

Can anyone tell me points to solve this problem?

Regards,

Gilbert Kim.

over 8 years ago

0 Yordan Kovachev over 8 years ago

TI__Guru**** 161600 points

Hi Gilbert,

Not sure why but the path to sdk is not exported properly by the pdksetupenv.bat file. Currently you you have:
PDK_INSTALL_PATH : /ti/PDK_K2~1/packages

And you should have the full path, like C:/ti/PDK_K2~1/packages. So after you run pdksetupenv.bat, try manually exporting just the PDK_INSTALL_PATH using the full path to the packages folder:
export PDK_INSTALL_PATH=C:/ti/PDK_K2~1/packages

Best Regards,
Yordan

0 Rahul Prabhu over 8 years ago

TI__Guru** 116170 points

gilbert,

Current version of Processor SDK RTOS v3.2 is validated only with CCS6.1.3. this is a common gotcha described in the Processor SDK RTOS FAQ:
processors.wiki.ti.com/.../Processor_SDK_RTOS_FAQ

We strongly recommend that you use the recommended CCS version as the recommended compilers and tools that are coded in the pdkProjectCreate Script and hence updating to newer version of the CCS will not work out of the box.

Regards,
Rahul

0 Gilbert-Kim over 8 years ago in reply to Rahul Prabhu

Intellectual 350 points

that's working properly on ccs 6.1.3.

Processors

Processors forum

CCS/66AK2H12: failed to make CCS project by 'pdkProjectCreate.bat'.