VLAN on TMS320C6678

LeonL

Other Parts Discussed in Thread: TMS320C6678

Hi, All.
I develop on TMS320C6678 EVM board and I'd like to config my network to be VLAN.
I can't find any example to this issue.
I tried to config CPSW and MAC (L2 classification), but even TX msg from DSP I don't see.
Where may I find explanation how to configure VLAN on this device.
Thanks in advance,
Leon.

over 8 years ago

0 Cvetolin Shulev-XID over 8 years ago

TI__Guru 65405 points

Hi Leon,

I've forwarded this to the ethernet experts. Their feedback should be posted here.

BR
Tsvetolin Shulev

0 lding over 8 years ago in reply to Cvetolin Shulev-XID

TI__Guru* 95265 points

Hi,

Please check

Regards, Eric

0 LeonL over 8 years ago in reply to lding

Intellectual 630 points

Thanks for the answer.
In my request, I did not specify that I do not use NDK.
I'm working with PA LLD.
Therefore, your link does not help me.
Once again the steps that I did and it does not work:

Init_MAC:
CSL_CPSW_3GF_setPortVlanReg (macPortNum, 0, 0, VLAN_ID); // for macPortNum - 0,1,2
Init_Switch:
CSL_CPSW_3GF_enableVlanAware ();
CSL_CPSW_3GF_setPort0VlanReg (0, 0, VLAN_ID);
Add_MAC_Address:
ethinfo.vlan = VLAN_ID;

Leon

Processors

Processors forum

VLAN on TMS320C6678