RTOS: problem of C6678 Processor-SDK

Sunny

Tool/software: TI-RTOS

hi professors,

I use the CCS6.2 to load program of image_processing_evmc6678l_master in c6678 evm but there are two errors. How to resolve it?

over 8 years ago

0 ToddMullanix over 8 years ago

TI__Guru* 96960 points

I've moved your thread to the device forum.

Todd

0 Rahul Prabhu over 8 years ago

TI__Guru** 116780 points

Please specify the version of Processor SDK RTOS that you are using. Please also note that you have picked a version of CCS that is not been used to test with Processor SDK RTOS. We recommend that you pick the version that is specified in the Release notes for the release that you are using.

Coming to the issue regarding data verification failures reported. If you see the memory location from which these errors are reported, the memory being referred to is in external DDR memory. Have you used a GEL file in the target configuration to initialize the system clocks and EMIF DDR interface.

If not, please ensure that you setup the hardware in no -boot mode as described here:
processors.wiki.ti.com/.../TMDXEVM6678L_EVM_Hardware_Setup

and in the target configuration file add the GEL file to the C667x_0 (Core0). The GEL file is located in the CCS directory ccsv6\ccs_base\emulation\boards\evmc6678l\gel\evmc6678l.gel

processors.wiki.ti.com/.../GSG:Adding_GEL_files_to_a_target_configuration

Regards,
Rahul

Processors

Processors forum

RTOS: problem of C6678 Processor-SDK