AM5718: 13MP camera on MIPI interface

Thanks for your reply.
2. I have been check AM571x TRM Rev. E. Document but there is no any description for Camera support(How much Mega Pixel). I mean this processor is capable to interface the 13MP Camera?

What is the video format of your camera - resolution, frames per second?

Thanks for your reply.

We don't required the video streaming. We captured the raw data of image (8bit/pixel) from camera.

We have some query as below.

1. is there possible to get the line by line raw image data instead of whole image data?
2. is there any Evolution board which support the USB 3.0 and camera (MIPI) interface?

Thanks & Best Regards;

Gentle Reminder..

Thanks & Best Regards;

Sorry about this delay. I have escalated this to the factory team.

Gentle Reminder..

Thanks & Best Regards;

Hello:

Regarding to USB3 camera support:
The USB driver in the SDK may support standard Linux USB3 camera modules, though there is no examples in the SDK. You may reference to
www.ti.com/.../tidep0076
where a PointGrey (https://www.ptgrey.com/) camera module was used with an AM57 EVM. You may also want to check if the camera vendor support UVC driver or not.

Regarding to 13MP support over CSI-2:
Please confirm the spec of the camera module CSI-2 interface, with respect to required clock speed and number of lanes. This will allow us to confirm if the CSI-2 PHY is compatible with the camera. In the meantime, I am confirming maximum line width of our internal buffers to ensure it can support 4k pixel line width.

regards
jian

Hi jian,

Thanks for your quick answer.

We have not concern with USB3.0 camera.

We are asking for is there any evolution kit which support USB 3.0 (usb core (host+device)) and camera mipi CSI-2 interface support.

Best Regards;

Nikunj Patel

gentle reminder.

Thanks & Best Regards;

Nikunj Patel

Hello everyone;

I want to download the "ti-processor-sdk-linux-automotive-omap5-uevm-6.04.00.02-installer.bin" sdk for Omap5432 evm board.

Please provide me the link for that.

Thanks & Best Regards;

Nikunj Patel

Hello  everyone;

Gentle reminder.

Thanks & Best Regards;

Nikunj Patel.

Hi Nikunj
Sorry for keeping you waiting on this thread. Unfortunately no one on the team supporting these forums are familiar with OMAP5 SDK etc, and will likely not be able to support any queries on it.
To your original query on TI EVM supporting MIPI CSI , unfortunately currently none of the AM57x family EVMs have support for this.

You can look at the following post

e2e.ti.com/.../2262820

You can search for the TDA2 family evaluation boards, available from Spectrum Digital.

Hope this helps some.
Regards
Mukul