Linux/am3359: Linux/am3359

Dmitry Andreev13

Part Number: AM3359
Other Parts Discussed in Thread: TLK110, DP83630, DP83640

Tool/software: Linux

Hello!
We made our board based on am335x-icev2, just ethernet part replaced from TLK110 to DP83630.
How I should configure Device Tree for DP83630?
Is there driver available in LinuxRT kernel?

Thanks

over 8 years ago

0 Cvetolin Shulev-XID over 8 years ago

TI__Guru 65405 points

Hi Dimitry,

Check the linked below resources:
Software design guide:
www.ti.com/.../toolssoftware
and Linux drivers:
www.ti.com/.../ethernet-sw
You can try LINUX-DP83640 driver. Also you can find there necessary menuconfig settings.

BR
Tsvetolin Shulev

0 Dmitry Andreev13 over 8 years ago in reply to Cvetolin Shulev-XID

Prodigy 130 points

Hi
I compiled kernel with dp83640 driver
- added "config DP83640_PHY" into /drivers/net/phy/Kconfig
- added "CONFIG_DP83640_PHY=y" into .config

dmesg have record: NatSemi DP83640 detected
eth0, eth1 is up, but only Rx working, Tx not

0 Dmitry Andreev13 over 8 years ago in reply to Dmitry Andreev13

Prodigy 130 points

This helped me https://ez.analog.com/thread/49703

Processors

Processors forum

Linux/am3359: Linux/am3359