RTOS: SYSBiOS - ADV7182 driver support

What processor are you using to interface to the adv7182 chip?

Todd

Todd,
Gokul is using a DRA7xx (J6) processor.
John

I've moved this to the device forum. They would have a better idea where to start.

Todd

Hi Gokul,

I have forwarded your question to drivers expert.

Regards,
Yordan

Thanks Sivaraj.

First I have to do the I2C initialisation (i2c bus number, speed).

We are able to find read & write specific calls.
Bsp_deviceRead8(i2cInstId, i2cDevAddr, regAddr, regVal, numRegs);
Bsp_deviceWrite8(i2cInstId, i2cDevAddr, regAddr, regVal, numRegs);

What are the calls specific to I2c part for initialisation ? we are not able to find in this driver code.

Thanks & regards,
Gokul

I did not get your question.

my question is before read and write, whether we need to configure the bus speed  to initialise the I2c -bus ?

Is there  way to detect the  i2c-slaves in an i2c-bus ?

I am trying to understand the adv7611 driver .

When will the function Bsp_adv7611Create be called ?


/** \brief ADV7611 driver function pointer. */
static const Fvid2_DrvOps gBspAdv7611DrvOps =
{
FVID2_VID_DEC_ADV7611_DRV, /* Driver ID */
&Bsp_adv7611Create, /* Create */
&Bsp_adv7611Delete, /* Delete */
&Bsp_adv7611Control, /* Control */
NULL, /* Queue */
NULL, /* Dequeue */
NULL, /* ProcessFrames */
NULL, /* GetProcessedFrames */
NULL, /* ProcessRequest */
NULL /* GetProcessedRequest */
};