RTOS/AM4372: Memory requirements for TCP/IP stack

Marcio Borges

Expert 1950 points

Part Number: AM4372

Tool/software: TI-RTOS

We are evaluating the possibility of using the AM4372 SoC in an application that basicaly forwards Ethernet messages (TCP, UDP) to SPI channels and vice-versa.

What are the requirements for RAM / Flash capacities for TI-RTOS and TI TCP/IP stack,?

over 8 years ago

0 Biser Gatchev-XID over 8 years ago

TI__Guru**** 393215 points

The RTOS team have been notified. They will respond here.

0 lding over 8 years ago in reply to Biser Gatchev-XID

TI__Guru* 95265 points

Hi,

For AM437x, there is NIMU example available for network protocols under pdk_am437x_1_0_x\packages\ti\transport\ndk\nimu\example, you can look at the map file to see the stack, program and data memory usage.

AM437x supports up to 2GB DDR in addition to the inetrnal RAM, it also supports GPMC interface which you can connect to NAND or NOR.

Regards, Eric

Processors

Processors forum

RTOS/AM4372: Memory requirements for TCP/IP stack