3D Model needed for CBD Package

Bill Noel

Prodigy 220 points

Support Path: /Tools & software/Help find tools and software/Models & Simulation/Request new model/

Please provide a 3D model for the CBD package. TDA2Ex SoC for ADAS 17mm Package Silicon Rev 2.0

over 8 years ago

0 Mariya Petkova over 8 years ago

TI__Expert 4885 points

Hi, Bill Noel,

Is the mechanical data in Data Manual what you need?

Or you need a model for a SW simulation?

Regards,

Mariya

0 Bill Noel over 8 years ago in reply to Mariya Petkova

Prodigy 220 points

Hello Mariya - I need a 3D model in STEP AP214 format. I already have the drawing you sent. Thank you anyway for your help.

0 Mariya Petkova over 8 years ago in reply to Bill Noel

TI__Expert 4885 points

I will ask around where can you find the model and will answer here.

regards,
Mariya

0 kcastille over 8 years ago in reply to Mariya Petkova

TI__Guru 55427 points

Bill,

Can you let us know your intended usage of such a model?

Thanks
Kyle

0 Bill Noel over 8 years ago in reply to kcastille

Prodigy 220 points

We create a 3D Model of our completed board assemblies. These models may be used in the design process to communicate physical size of the assembly between the Electrical and Mechanical CAD. As part of that process we like to create the truest representation of the physical sizes of the respective devices used in the model..

0 Bill Noel over 8 years ago in reply to Bill Noel

Prodigy 220 points

Anyone have any updates on this request?

0 Bill Noel over 8 years ago in reply to Bill Noel

Prodigy 220 points

Is anybody out there?

0 kcastille over 8 years ago in reply to Bill Noel

TI__Guru 55427 points

Bill, We're working on it ... I don't have an eta yet.

Regards
Kyle

Processors

Processors forum

3D Model needed for CBD Package