Linux/AM4379: How to directly boots the Linux kernel from QSPI boot with TMDXSK437X.

Sh.Sasaki

Guru 13625 points

Part Number: AM4379
Other Parts Discussed in Thread: TMDXSK437X

Tool/software: Linux

Hi all,

I'd like to know how to directly boots the Linux kernel from QSPI boot with TMDXSK437X.

I looked at the link below and it was mentioned about DRA7xx.
processors.wiki.ti.com/.../Linux_Core_U-Boot_User's_Guide

Please teach me how to do this boot with AM437x.

Now, I was able to launch uboot from QSPI boot using AM437x.
My SDK is "ti-processor-sdk-linux-rt-am437x-evm-03.03.00.04".

Best regards,
Sasaki

0 Yordan Kovachev over 9 years ago

Hi,

In the same wiki there is an AM437x support example:
processors.wiki.ti.com/.../Linux_Core_U-Boot_User's_Guide
Best Regards,
Yordan

0 Sh.Sasaki over 9 years ago in reply to Yordan Kovachev

Guru 13625 points

Hi Yordan-san,

Thank you for your reply.

I would like to start the Linux kernel from SFLASH connected to QSPI.

Do you have any information on how to do this?

Now I’m successful in running u-boot from SFLASH.

Best regards,

Sasaki

0 Yordan Kovachev over 9 years ago in reply to Sh.Sasaki

0 Sh.Sasaki over 9 years ago in reply to Yordan Kovachev

Guru 13625 points

Yordan-san,

Thank you for your support.

I will try it with reference to your web link.

Best regards,

Sasaki

Processors forum