Other Parts Discussed in Thread: TMS320DM6467
Hi all.
I have an TMS320DM6467 Evaluation Module and board with OV5620, which connected to VPIF (via DC_P2 on board connector). By I2C i configure internal OV5620 registers for 1.3Mpix mode and correct timing diagram as Figure 11. Waveform on Raw Capture Interface Normal Mode (SPRUER9C). By oscilloscope i saw, that timing diagram is correct. I allocated memory for frame (phys 0x98000000).
Next step is configure SDRAM addresses, CH0, CH1 configure registers, but i don't know how to do it correctly.
Could anybody help write step-by-step instruction how correct configure SDRAM address, offset, and other registers.