AM572X: Target connection from CCS

saman mahmoudi

Hi.

I want to test a basic program by C language on am5728-evm by cortex M but i have no programmer to make connection target....

is there any other way to make connective target to run my basic program by cortex M and get result?

please help me...

over 9 years ago

0 Biser Gatchev-XID over 9 years ago

TI__Guru**** 393215 points

Hi,

The is no way to connect to the AM572x GP EVM without a JTAG emulator. See processors.wiki.ti.com/.../AM572x_GP_EVM_Hardware_Setup for details

0 Rahul Prabhu over 9 years ago

TI__Guru** 116870 points

Saman,

You need a emulator(XDS200 or XDS100v2) to connect to the cores and debug/develop code for M4. You have the option of using SD card based secondary boot loader as described here:
processors.wiki.ti.com/.../Processor_SDK_RTOS_BOOT_AM57x

Booting can only be tested if you have a binary that doesn`t need debugging but not ideal for development.

Regards,
Rahul

Processors

Processors forum

AM572X: Target connection from CCS