AM335X: Cross platform communications

dogukanbayir

Other Parts Discussed in Thread: AM3359, PROFIBUS, AM5728

I have a lot of questions about cross platform communications .
You can find my questions below.

Is it possible to communicate Profinet Device on sitara's first port and EtherNet/IP Device on the sitara's second port ?

Is it possible to cross communicate with the other industrial platform ?(Profibus,ModBus,CanBus,EtherCat…)

If you have a sample code and sample application , could you send me please .

over 7 years ago

0 Biser Gatchev-XID over 7 years ago

TI__Guru**** 393215 points

Which Sitara device are you asking about?

0 dogukanbayir over 7 years ago in reply to Biser Gatchev-XID

Prodigy 55 points

AM3359 Industrial Communications Engine
Kind Regards.

0 Biser Gatchev-XID over 7 years ago in reply to dogukanbayir

TI__Guru**** 393215 points

Thanks. The RTOS team have been notified. They will respond here.

0 Paula Carrillo over 7 years ago in reply to dogukanbayir

TI__Mastermind 34640 points

Hi, AM3359 has 1 PRU-ICSS with 2 PRUs. Typically Industrial protocols use both PRUs and (Ethernet ports). So the answer would be no for AM335x. However, you can have an Industrial protocol gateway using a bigger platform with more PRU-ICSS such as AM572x.

We have a TI design for your reference: Industrial Communications Gateway PROFINET® IRT to PROFIBUS® Reference Design

Main TI design link: http://www.ti.com/tool/TIDEP-0075

Thank you,

Paula

0 dogukanbayir over 7 years ago in reply to Paula Carrillo

Prodigy 55 points

Hi Paula,
Thank for your interest and your informations. I am asking for the correct my situation.
Now, im building a machine .This machine has industrial robot and robot has Profibus communication. Additionaly i have Siemens PLC ,it has Profinet and PLC is my master device also i have slave device, this device's has Ethernet/IP protocol so i want to communicate these devices. I wanna communite Ethernet/IP slave to Profibus or Profinet device. I have AM3359 Industrial Communications Engine. Can i communicate these device with my AM3359-ICE?

0 Paula Carrillo over 7 years ago in reply to dogukanbayir

TI__Mastermind 34640 points

Hi Dogukanbayir, no, you cannot use AM3359 for an Ethernet/IP to Profibus/Profinet gateway. But you can use AM5728 IDK. Below a TI design which showcase a Profinet/Profibus gateway for your reference

Industrial Communications Gateway PROFINET® IRT to PROFIBUS® Reference Design

Thank you,

Paula

Processors

Processors forum

AM335X: Cross platform communications