66AK2H14: SGMII interface to DP83867ERGZ

Madhu Sharma

Expert 2915 points

Part Number: 66AK2H14

Hi,

Is it possible to interface Ethernet PHY DP83867ERGZ to keystone II 66AK2H14 device ?

If yes, I would like to know if there is any application note or EVM to better explain the interface between these two.

Thanks in advance.

Regards,

Madhu.

0 Yordan Kovachev over 8 years ago

Hi,

If yes, I would like to know if there is any application note or EVM to better explain the interface between these two.

Yes you can connect such interface to 66AK2H14. See this thread:
e2e.ti.com/.../553819

For the hardware connection, follow the Hardware Design Guide for Keystone II devices, the 66AK2H14 Data Manual & the schematic checklist (processors.wiki.ti.com/.../Keystone_Multicore_Device_Family_Schematic_Checklist

Best Regards,
Yordan

Processors forum