Part Number: TCI6638K2K
Hi,
Old data manual (SPRS836) says, ARMENDIAN in Table 7-16 is
0 = Big Endian
1 = Little Endian.
It seems user can select Little Endian to use B31 pin. But latest data manual (SPRS836F) says B31 pin is BOOTMODE_RSVD and user cannot select the endianess.
When I read below thread, I would like to confirm the ARM Endianess.
1) it seems ARM Endianess is big endian at boot. Is my understanding correct?
2) Could you please tell me how to change the Endian If we would like to use Little Endian?
Best Regards,
Masashi Ohhashi
