uPP driver on 'C6748 for CCS 4.1

PaulSchoenke

We are having difficulty getting the uPP driver to show up in DSP/BIOS.

We’ve looked on the web, BSP examples etc. There is a lot out there for CCS3.x but we have not found anything for CCS 4.X

Any examples or help would be much appreciated.

Thanks!

over 15 years ago

0 Mariana over 15 years ago

TI__Mastermind 24340 points

Hi Paul,

The latest version of the PSP (platform support package) has both CCS3 and CCS4 examples.

To install the software, please see:

http://processors.wiki.ti.com/index.php/Getting_Started_Guide_for_C6748

Make sure that you install pspdrivers_01_30_01 or later.

After you install the software, the upp example will be at:

C:\Program Files\Texas Instruments\pspdrivers_01_30_01\packages\ti\pspiom\examples\evm6748\upp\build\ccs4

For PSP information see:

http://e2e.ti.com/support/dsp/omap_applications_processors/f/42/p/41165/143421.aspx#143421

0 PaulSchoenke over 15 years ago

Genius 3290 points

Thanks again. Still having difficulty with sorting out CCS4.1 with BIOS 5 vs. BIOS 6 Most of the examples are for BIOS 5 and things are substantially changed for BIOS 6. Getting the uPP driver working on BIOS is still a problem..

0 Mariana over 15 years ago in reply to PaulSchoenke

TI__Mastermind 24340 points

Have you tested the examples for BIOS5 that I pointed? Did you have any problems with it? If yes, what problems?

Processors

Processors forum

uPP driver on 'C6748 for CCS 4.1