MCS to BIN conversion source code

Sreejaya Varma

Intellectual 430 points

Hi,

Does anyone know whether C source code is available for converting an .mcs file to .bin file.

Regards,

Sreejaya

over 7 years ago

0 Cvetolin Shulev-XID over 7 years ago

TI__Guru 65405 points

Hi Sreejaya,

Could you give more detailed description about your issue? What HW platform and what SW release you are using?

BR
Tsvetolin Shulev

0 Sreejaya Varma over 7 years ago in reply to Cvetolin Shulev-XID

Intellectual 430 points

Hi,
My requirement is to interpret the .mcs (Intel Hex format) file generated by the Xilinx FPGA tool, and write the binary file to FPGA boot Flash. This conversion from MCS to BIN is to be done using K2L processor, and the binary to be send to FPGA for writing to FPGA's Flash memory.

I would like to know whether source code is readily available for converting the MCS to binary, to be written to Flash.

Thanks
Sreejaya

Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

Processors

Processors forum

MCS to BIN conversion source code