AMIC110: Flash writer

Keirs

Part Number: AMIC110
Other Parts Discussed in Thread: TMDXICE110,

Hello.

I have a question.

Where is the "Flash writer" to program TMDXICE110?

I understand Flash writer is necessary to program into SPI Flash implemented in the TMDXICE110 according to the document.

But, I can't find that.

Could you tell me where "Flash writer" is?

Regards,

uchida-k

over 8 years ago

0 Biser Gatchev-XID over 8 years ago

TI__Guru**** 393215 points

The factory team have been notified. They will respond here.

0 Keirs over 8 years ago in reply to Biser Gatchev-XID

Expert 2605 points

Hi Biser,

Thank you for your reply.
I'm waiting for their reply.

Regards,

uchida-k

0 Rahul Prabhu over 8 years ago

TI__Guru** 116170 points

Uchida-san,

The flash writer to program the TMDXICE110 is same as the the flash writer for AM335x ICEv2 that is provided in the SDK. Both platforms have the same SPI NOR flash device. the flash utility can be located under the directory path :
pdk_am335x_1_0_6\packages\ti\starterware\tools\flash_writer

Please note that in Processor SDK RTOS v3.3, the AMIC110 bootloading from SPI was not supported due to the some missing DDR, pinmux changes that were not incorporated in the secondary bootloader, in time for the release. This issue will be fixed in the Processor SDK RTOS v4.0 release that will be available at the end of this month.

Let us know if you have any issues with using the flash writer utility.

Regards,
Rahul

0 Kaka over 8 years ago in reply to Rahul Prabhu

Guru 24520 points

Hi Rahul,

Now we could get the Version 4.0 SDK. Does the pinmux issue fix ?

Best regards.
Kaka

0 Rahul Prabhu over 8 years ago in reply to Kaka

TI__Guru** 116170 points

Yes, this issue is now been resolved in the SDK.

Regards,
Rahul

Processors

Processors forum

AMIC110: Flash writer