RTOS/AM5728: PCIe EP compliance test

Ernest Cho

Expert 3171 points

Part Number: AM5728

Tool/software: TI-RTOS

Hello Champs,

One of my customer would like to have AM5728 PCIe EP mode compliance test.

And they would like to know how to set the device for those test.

Could you please give me information regarding AM5728 PCIe register setting or let me know if there are example source code for TI-RTOS or Bare metal.

Best Regards,
Ernest Cho

over 8 years ago

0 Biser Gatchev-XID over 8 years ago

TI__Guru**** 393215 points

The RTOS team have been notified. They will respond here.

0 lding over 8 years ago in reply to Biser Gatchev-XID

TI__Guru* 95265 points

Hi,

The processor SDK RTOS doesn't have code for PCIE compliance test, it is a test example of data exchange between RC and EP, with EDMA and interrupt support. I added HW team for compliance test help.

Regards, Eric

0 Ernest Cho over 8 years ago in reply to lding

TI__Expert 3171 points

Hi,

Do you have any update for this? Could you please advise for compliance test?

Customer need source code for AM5728 PCIe Compliance test.

Regards, Ernest.

0 -DK- over 8 years ago

TI__Mastermind 27890 points

PCIe compliance mode will automatically be entered when the DUT is connected to the CLB (compliance load board) and a scope running the PCIe compliance package. No EP SW is required for entering PCIe compliance mode.

Intel has a video that discuss this subject:

0 Ernest Cho over 8 years ago in reply to -DK-

TI__Expert 3171 points

-DK- said:

PCIe compliance mode will automatically be entered when the DUT is connected to the CLB (compliance load board) and a scope running the PCIe compliance package. No EP SW is required for entering PCIe compliance mode.

DK,

Customer successfully done the test.

Thank you.

Processors

Processors forum

RTOS/AM5728: PCIe EP compliance test