AM3359: ICE development

Gilmar Oliveira

Hello,

I'm start to development a module PROFINET and Ethernet IP and I want to use the SITARA processor in this project, but I received the KIT and didn't came application with the KIT, I need help to start work with the Kit. Some one can help me.

over 8 years ago

0 Biser Gatchev-XID over 8 years ago

TI__Guru**** 393215 points

Hi,

You need to download RTOS and Industrial software packages. Here are the links:
software-dl.ti.com/.../index_FDS.html
www.ti.com/.../PRU-ICSS-INDUSTRIAL-SW

On the download pages you will also find links to related documentation.

These are documentation links for the ICE board:
processors.wiki.ti.com/.../AM335x_Industrial_Communication_Engine_EVM_Rev2_1_HW_User_Guide
processors.wiki.ti.com/.../AM335x_Industrial_Communications_Engine_Board_Design_Files

0 Gilmar Oliveira over 8 years ago in reply to Biser Gatchev-XID

Prodigy 20 points

Hi,

Thank you for reply.

Do you know if there are some workshop or training about SITARA development kit ?

If there is some video is good for me understand how to use the KIT.

Best Regards.

Gilmar

0 Paula Carrillo over 8 years ago in reply to Gilmar Oliveira

TI__Mastermind 40580 points

Hi Gilmar, we have some training series that could help you.

Sitara™ ARM® Processors Boot Camp Training Series

Processor SDK Training Series

Programmable Real-Time Unit (PRU) Training Series

Above links are a little bit to broad but cover the basics. If you have a specific question please let us know in order to point you to a wiki or application note that can help you.

By the way which OS are you planning to use? and what is your final application?

thank you,

Paula

Processors

Processors forum

AM3359: ICE development