• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 98 subscribers
  • Views 562 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMDSLCDK138: Need information for which LCD to connect this LCDK Kit

Senthil Kumar11061
Expert 1270 points
Part Number: TMDSLCDK138

Any part number or ordering  information about the LCD to connect LCDKL138 Kit?

  • 0
    TI__Guru**** 161600 points
    Hi,

    You can connect your board to a display using the vca connector.

    You also have an LCD connector, see processors.wiki.ti.com/.../C6748_Development_Kit_(LCDK). In the wiki search for LCD port, you'll find the following statement:
    "One LCD Port (Beagleboard XM connectors)
    One Composite Video Input (RCA Jack)
    One Leopard Imaging Camera Sensor Input (36-pin ZIP connector)
    Three AUDIO Ports (1 LINE IN & 1 LINE OUT & 1 MIC IN)
    14-pin JTAG header (No onboard emulator; external emulator is required)
    Note
    The LCDK does not have an onboard emulator. An external emulator from TI or a third-party will be required to start developing on it.
    The LCD port connector was designed to support off the shelf LCD panel that is no longer available from any vendor. We are not aware of any other off the shelf LCD "


    Best Regards,
    Yordan