Part Number: TMS320C6678
Other Parts Discussed in Thread: TMDXEVMPCI
Tool/software: Code Composer Studio
Hi,
I have a TMS320C6678EVM with TMDXEVMPCI Adapter Card.
I programmed my code at NAND flash and and tested at PC using following Link. (processors.wiki.ti.com/.../Processor_SDK_RTOS_BOOT_C66x
My problem is,
When I set EVM boot mode as NAND boot, my PC does not recognize PCIE card.
When I set EVM boot mode as PCIE boot, my PC recognize PCIE card but programmed code in NAND flash is not loaded on board.
How can I make my board to load NAND image on power-on and regognized by PC ? (That is run NAND flash code with my PC O/S)
Regards,
Stellar
