• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 441 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320C6657: Independently program the chip

Joseph Kadifa
Intellectual 340 points
Part Number: TMS320C6657
Other Parts Discussed in Thread: TMDSEMU200-U,

Hello,

I recently purchased a TMS320C6657 processor and a XDS200 USB Debug Probe (TMDSEMU200-U). I would like to place the processor on a PCB board and program it on that board with the probe I purchased. What hardware pieces would you recommend to use on this PCB board to allow the probe to program the processor? Is there a way to program the processor without soldering it to a PCB board? If more clarification is necessary, please let me know as well.

Thank you,

Joseph

  • 0
    TI__Guru**** 161600 points
    Hi Joseph,

    [qutoe]Is there a way to program the processor without soldering it to a PCB board?[/quote]
    I don't think so.

    [qutoe]What hardware pieces would you recommend to use on this PCB board to allow the probe to program the processor?[/quote]
    You need to design a board according to the specific device data manual & the complementary hardware design guide. In those documents you have a complete guidance on how to design the debug probe & utilize different boot options. Full documentation of the device is located here:
    www.ti.com/.../technicaldocuments

    Best Regards,
    Yordan