CCS/TMDXIDK5728: Getting started with the IDK

user5077559

Prodigy 40 points

Part Number: TMDXIDK5728
Other Parts Discussed in Thread: AM5728

Tool/software: Code Composer Studio

Hi, I have an am5728 EVM IDK and I have some problems :

1. Do we need to setup the Linux OS to the EVM and IDK?

2. How to connect EVM and IDK to PC BY CCS?

3. The touch ability of EVM's screen after reset OS is not good, is there any solutions?

Thank you very much.

over 8 years ago

0 Rahul Prabhu over 8 years ago

TI__Guru** 116680 points

We support Processor SDK RTOS, Processor SDK Linux and Processor SDK Android for this device so you can run bare-metal, TI RTOS, Linux and also Andriod on this platform.

If you want to connect and emulator and debug on this device then the instructions are provided here:
processors.wiki.ti.com/.../TMDXIDK5728_Hardware_Setup

For simple example like Hello world using TI RTOS and bare-metal code to running peripheral examples can be done by referring to processor SDK RTOS documentation herE:
processors.wiki.ti.com/.../Processor_SDK_RTOS_Getting_Started_Guide

Hope this helps.

Regards,
Rahul

0 user5077559 over 8 years ago in reply to Rahul Prabhu

Prodigy 40 points

Thanks , I 've resolve my problems .

Processors

Processors forum

CCS/TMDXIDK5728: Getting started with the IDK