AM5728: Camera driver installation

tori moinh

Other Parts Discussed in Thread: BEAGLEBOARD-X15, AM5728

I want to install driver of Point Grey 3.0 Flycapture2, I use GS3-U3-41C6M-C camera. But I don't know how to do step-by-step? I am using Linux 14.04. I use Beagle Board X15, AM57xx-EVM. Please help me. Thank you.

over 8 years ago

0 Biser Gatchev-XID over 8 years ago

TI__Guru**** 393215 points

What EVM are you using? Beagleboard-X15 or AM572x GP EVM?
What Linux version are you using?
How is this camera connected to the EVM?

0 tori moinh over 8 years ago in reply to Biser Gatchev-XID

Prodigy 40 points

I use AM5728 General Purpose EVM, Beagleboeard-X15. Linux 14.04. My camera is Point Grey USB 3.0 (GS3-U3-41C6M-C).

0 Biser Gatchev-XID over 8 years ago in reply to tori moinh

TI__Guru**** 393215 points

Are you running Linux 14.04 on the EVM?

0 tori moinh over 8 years ago in reply to Biser Gatchev-XID

Prodigy 40 points

No, Sir. I run Linux on PC. I connect PC and AM572x EVM following: processors.wiki.ti.com/.../Sitara_Linux_Training:_Hands_on_with_QT.

0 tori moinh over 8 years ago in reply to tori moinh

Prodigy 40 points

Dear Sir,

I followed instructions from: "Getting Started with FlyCapture2 and ARM". I try to install Linux distribution on Beagleboard x15. Then, on my board looks like a prompt line with "ubuntu@arm". But, I don't know how to copy driver (flycapture driver) to board for installing? And if I want to use PC (Linux) connect BB x15, how can I install the driver? Thank you.

0 Biser Gatchev-XID over 8 years ago in reply to tori moinh

TI__Guru**** 393215 points

From your last post it seems that you are using the Beagleboard x15 and Ubuntu Linux on it. Neither of these is supported by TI on this forum. Please ask on www.beagleboard.org

Processors

Processors forum

AM5728: Camera driver installation