DM355D in Extended Temp

Brad Griffis

Do our extended temp devices have the Rev D ROM code? Looking at the part number (e.g. TMS320DM355ZCEA216) it seems like they do not use Rev D ROM code. Can someone please clarify:

Do we offer Rev D silicon in extended temp.
How does one distinguish Rev D from previous silicon if we did not change the part number?

Thanks,
Brad

over 15 years ago

0 Miguel A. Alanis over 15 years ago

TI__Genius 9490 points

Brad,

1) Yes for the 135/216mhz devices, see errata table1.

2) Rev D has a D in the part number, see errata Table1

regards,

miguel

0 Brad Griffis over 15 years ago in reply to Miguel A. Alanis

TI__Guru*** 125430 points

Miguel,

Ok, I think that almost answers the question. I see the following part numbers listed in Table 1 of the errata:

TMS320DM355DZCEA13
TMS320DM355DZCEA21

The only issue right now is that I do not see those part numbers listed in the product folder as orderable part numbers. Is this a mistake in our web page? When do we plan to offer those devices?

Thanks,
Brad

0 Miguel A. Alanis over 15 years ago in reply to Brad Griffis

TI__Genius 9490 points

Brad,

Thanks for pointing this out. This is a problem with the web (I'll pass this on to the right folks). The Datasheet part numbers listed are correct and its offered for those two part #s.

regards,

miguel

Processors

Processors forum

DM355D in Extended Temp