AM3517 EVB debug with CCS4 by Blackhawk USB100v2

Ofer Eilon

Other Parts Discussed in Thread: AM3517

I have the EVB- AM3517 connected with Blackhawk USB100v2 JTAG and in the CCS4 (4.2.0.09000) there is no target configuration for the AM3517.

Could you send me the whole project (BSL tests) with sources for EVM-AM3517 that I will be able to import to CCS4 for checking my enviroment and setup.

Also Please advice how to configure the AM3517 JTAG in CCS4.

Thanks,

Ofer

over 15 years ago

0 Chintan Gala over 15 years ago

TI__Prodigy 670 points

Kindly have a look at this forum post : http://e2e.ti.com/support/dsp/sitara_arm174_microprocessors/f/416/t/54713.aspx

That would answer your questions.

Regards,

Chintan Gala

0 Ofer Eilon over 15 years ago in reply to Chintan Gala

Intellectual 320 points

Hi Chintan,

I have tried to import the project 20091001_shiva_bsl into CCS4 but without success.

Could you send me the instruction on how to import the project step by step and run it in debug mode on the CCS4.

Thanks,

Ofer

Processors

Processors forum

AM3517 EVB debug with CCS4 by Blackhawk USB100v2