USB3320 PHY - AM37xx

Mione S

Prodigy 530 points

Other Parts Discussed in Thread: OMAP3530, AM3517, TUSB1210

We are using the SMSC USB3320 as our USB PHY, and have found the following issue:

http://e2e.ti.com/support/dsp/omap_applications_processors/f/42/t/40694.aspx

Can you tell us if this has been resolved on the AM37xx?

over 15 years ago

0 peaves over 15 years ago

TI__Guru 62895 points

This problem has been resolved in AM37xx silicon revision 1.1 devices.

Regards,

Paul

0 Mione S over 15 years ago in reply to peaves

TI__Prodigy 530 points

Thanks Paul,

Do you know if there are any proposed fixes for the 3530?

Thanks,
Mione

0 peaves over 15 years ago in reply to Mione S

TI__Guru 62895 points

I'm not aware of any plans to fix anything in the OMAP3530.

Regards,

Paul

0 AnBer over 13 years ago in reply to peaves

TI__Mastermind 30150 points

Hi Paul,

- Plan to fixe it in AM3517?
It is refered as Advisory 1.1.33:
http://www.ti.com/lit/er/sprz306b/sprz306b.pdf

- Do we advise to use TUSB1210 instead? Or do you have other suggestions?

Thanks and best regards,

Anthony

0 peaves over 13 years ago in reply to AnBer

TI__Guru 62895 points

I am not aware of any plans to fix this issue in the AM3517.

The TUSB1210 does not have this problem when used with the AM3517. I am not aware of any other options.

Regards,

Paul

Processors

Processors forum

USB3320 PHY - AM37xx