CCS/66AK2L06: Guide needed to find out the example codes to start development

my ccs version is the latest 7.3.0.00019
the processor sdk linux/rtos is from the link
www.ti.com/.../PROCESSOR-SDK-K2L

Hi Thxin,

After installing PROCESSOR-SDK-RTOS-K2L packet you can read Processor SDK RTOS Getting Started Guide at:
processors.wiki.ti.com/.../Processor_SDK_RTOS_Getting_Started_Guide
and also you can find demo and example projects described at:
processors.wiki.ti.com/.../Processor_SDK_RTOS_Examples_and_Demonstrations

BR
Tsvetolin Shulev

Hi Tsvetolin,

Thanks for your reply. My target is to develop some applications on JESD204B and Ethernet interface. Is it related to the ARM Cortext-A15. I now focus on the processor sdk linux. Is it the right direction?

I am struggling to import the sdk examples to ccs and make it run on the K2L board. I really hope someone who has done this before could help me to setup the development environment. I am new to ccs and ti's keystone products. I am a little bit confused by the ti's documents to setup the processor SDK. There are so many hyperlinks and topics for this. I have tried to follow them, but I get lost. Please help to define a simple and easy to follow step-by-step instruction especially for K2L board for environment setup and importing simple example to start development.

Many thanks!