CCS/TMS320C6748: Running PIL simulation with matlab for TMS320C6748

AAAA PPPP

Part Number: TMS320C6748
Other Parts Discussed in Thread: CCSTUDIO,

Tool/software: Code Composer Studio

Hello,

I am developing model for TMS320C6748 LCDK board in simulink . generated code. Now I want to do PIL simulation from matlab in this board. How can I connect board and matlab to download code from there like in CCstudio. Please help.

Thanks in advance

with regards

Shalini

over 7 years ago

0 Cvetolin Shulev-XID over 7 years ago

TI__Guru 65405 points

I've forwarded your query to the software experts. Their feedback should be posted here.

BR
Tsvetolin Shulev

0 Rahul Prabhu over 7 years ago in reply to Cvetolin Shulev-XID

TI__Guru** 116170 points

We don`t support MATLAB simulation on TI DSPs on this forum. You will need to post the question on MATHworks forums to get support on this issue.

Hope this helps.

Rahul

0 Brian McKay over 7 years ago

Mastermind 9005 points

This is possible, but you need to use MathWorks Embedded Coder. Here is a link to basic documentation on SIL and PIL (login may be required)

https://www.mathworks.com/help/ecoder/ug/about-sil-and-pil-simulations.html

For the most part, the biggest task is to set up Embedded Coder to interface with your board. While all the the tools and hooks are available to do this, you must configure this yourself.

For additional assistance, please contact MathWorks Technical Support.

Cheers,

-Brian

Processors

Processors forum

CCS/TMS320C6748: Running PIL simulation with matlab for TMS320C6748