TDA3XEVM: TDA3X: DCC Tool Dependencies

Naveen.K, VVDN Technologies

Part Number: TDA3XEVM

We have an issue running the DCC Tool 2.1. As per the Install guide, the following Prerequisites to run the tool are installed.

Matlab Runtime libraries (MCRInstaller) for version 7.13
Microsoft Visual C++ 2010 Redistributable Package (x86)
Microsoft .NET Framework 4

But the application is unable to start. Tried on different Windows systems.

Is there any other missing dependencies for the tool.

Kindly help.

over 8 years ago

0 Brijesh Jadav over 8 years ago

TI__Guru**** 490265 points

Hi Naveen,

You require to install first Vision C++ Redistribution package, then .Net Framework and then Matlab Runtime. could you follow this sequence and see if it works?

Rgds,
Brijesh

0 Naveen.K, VVDN Technologies over 8 years ago in reply to Brijesh Jadav

Prodigy 135 points

Hi Brijesh

Tried this sequence but couldn't get it work

0 Brijesh Jadav over 8 years ago in reply to Naveen.K, VVDN Technologies

TI__Guru**** 490265 points

Hi Naveen,

Strange, could you please check if you are installing Matlab 64bit version, in case your PC is 64bit?

Rgds,
Brijesh

0 Naveen.K, VVDN Technologies over 8 years ago in reply to Brijesh Jadav

Prodigy 135 points

Hi Brijesh

We could get the DCC tool running by setting up on a 32 bit Windows 7 system and Matlab compiler runtime.

DCC tool 21 on 64-bit windows doesn't seems supported.

Thanks for your support.

Regards

Naveen

0 Brijesh Jadav over 8 years ago in reply to Naveen.K, VVDN Technologies

TI__Guru**** 490265 points

Glad to hear it started working.

Processors

Processors forum

TDA3XEVM: TDA3X: DCC Tool Dependencies