C6748 PADS layout?

David Meixner

I'm wondering if there's a C6748 layout available in PADS format (Mentor Graphics). The one from LogicPD is only in ORCAD format and the HawkBoard seems to be in Eagle Layout format. Thanks for your help.

over 15 years ago

0 jc-ti over 15 years ago

TI__Mastermind 27585 points

Mentor seems to offer a translator from ORCAD to PADS as part of their free evaluation software:

http://www.mentor.com/products/pcb-system-design/design-flows/pads/translators

The HawkBoard is actually in Allegro format. The company in this post looks like it offers a conversion service to PADS.

http://www.freelists.org/post/icu-pcb-forum/allegro-2-pads-power-pcb-conversion,2

0 Roger over 15 years ago

Expert 1330 points

Schematic gate or PCB decal??

0 Roger over 14 years ago

Expert 1330 points

You can take the schematic gate & PCB decal from the .sch & .pcb here http://www.era5.co.uk/C6748/

These are in PADS 2005.2. Pin names are limited to 40 characters in PADS so some are incomplete!

Regards --- Roger

Processors

Processors forum

C6748 PADS layout?