Linux/AM5728: VOUT2 pinmux configuration

Mohamed Aslam

Part Number: AM5728
Other Parts Discussed in Thread: THS8200

Tool/software: Linux

hi,

Good Day, We have a requirement to use VGA output so we are using ti THS8200 . we are giving Vout2 24 line output to the THS8200 . But we stuck how to configure those processor gpio pin to configure as Vout2.

Kindly help us to resolve this issue.

Thanks & Regards

Aslam

over 8 years ago

0 Biser Gatchev-XID over 8 years ago

TI__Guru**** 393215 points

Hi,

You should use the Pinmux Tool: processors.wiki.ti.com/.../TI_PinMux_Tool

0 Mohamed Aslam over 8 years ago in reply to Biser Gatchev-XID

Prodigy 160 points

Hi,

To configure Vout2 pinmux, we need to add the Vout2 pinmux configuration in uboot
Add the Vout2 pinmux information for the port in mux_data.h file located in board/ti/am57xx/

Build the uboot ,

now Those port will be muxed to the Vout2 .

Processors

Processors forum

Linux/AM5728: VOUT2 pinmux configuration