RTOS/66AK2H14: RTOS/66AK2H14:

Aishwarya Bhat

Intellectual 710 points

Part Number: 66AK2H14

Tool/software: TI-RTOS

How to use TI -RTOS for 66AK2H14 processor?

I didnt get any document regarding the same . Please help me with this.

Thank you

over 7 years ago

0 Yordan Kovachev over 7 years ago

TI__Guru**** 161600 points

Here is the Software Developer's Guide for TI RTOS:
processors.wiki.ti.com/.../Processor_SDK_RTOS_Software_Developer_Guide

Best Regards,
Yordan

0 Aishwarya Bhat over 7 years ago in reply to Yordan Kovachev

Intellectual 710 points

Thank you for your quick reply
I had gone through the above link but I didn't find exactly how to use TI-RTOS for 66AK2H14 in CCS IDE. Could u please share exact link.
Thanks in advance for any help or suggestion

0 Yordan Kovachev over 7 years ago in reply to Aishwarya Bhat

TI__Guru**** 161600 points

You can use the CCS for example to load and run examples from the TIRTOS.

Follow these steps:
cd ~/ti/pdk_k2e_4_0_7/packages
ykovachev@lin-0373:~/ti/pdk_k2e_4_0_7/packages$ source pdksetupenv.sh
ykovachev@lin-0373:~/ti/pdk_k2e_4_0_7/packages$ ./pdkProjectCreate.sh K2E evmK2E little gpio example arm

The above builds the gpio example project for K2G for the ARM core. You can find the project in ~/ti/pdk_k2e_4_0_7/packages/MyExampleProjects/. You can run CCS, connect to the board, load the project build it & run it on your board.

To build all available projects for both ARM & DSP cores of 66AK2H14 in the pdk run:
./pdkProjectCreate.sh K2E evmK2E little all all arm
./pdkProjectCreate.sh K2E evmK2E little all all dsp

Best Regards,
Yordan

0 Aishwarya Bhat over 7 years ago in reply to Yordan Kovachev

Intellectual 710 points

Thank you for your suggestion.
We are not using EVM instead we are using custom board containing "66AK2H14" processor in it. I need to add one custom driver to it and build the same. For this I need user manual. Do you have any such user manual for CCS ?!

0 Yordan Kovachev over 7 years ago in reply to Aishwarya Bhat

TI__Guru**** 161600 points

This what we have:
processors.wiki.ti.com/.../Adding_Custom_Board_Library_Target_to_Processor_SDK_RTOS_makefiles
processors.wiki.ti.com/.../Processor_SDK_RTOS_Board_Support
Once you add your custom board source to the SDK build system, you can use it to create a prject & compile it with CCS. Or you can add your driver to the RTOS kernel/bootloader.

Best Regards,
Yordan

0 Aishwarya Bhat over 7 years ago in reply to Yordan Kovachev

Intellectual 710 points

Hi,
Thanks for your suggestion.
Got to know how to add custom board library, similarly i want to know how add a new driver or any application to TI-RTOS and then it's compilation procedure.

0 Yordan Kovachev over 7 years ago in reply to Aishwarya Bhat

TI__Guru**** 161600 points

The above links explain the same.

Best Regards,
Yordan

Processors

Processors forum

RTOS/66AK2H14: RTOS/66AK2H14: