Linux/66AK2H14: What is the current recommended way of using Hyperlink under Linux?

Gergo Horvath

Part Number: 66AK2H14

Tool/software: Linux

Hi!

We have been using OpenMP and OpenMPI from MCSDK-HPC so far, but as MCSDK support seem to be ended, we are considering to use Processor SDK in the future, and I need your advice in some aspects.

What is the current recommended way of communicating through HyperLink, if OpenMPI is not available anymore?
Is OpenMP still usable and supported on Linux when using Processor SDK?

Best Regards,
Gergo

over 8 years ago

0 Yordan Kovachev over 8 years ago

TI__Guru**** 161600 points

We're looking into this. Feedback will be posted here.

Best Regards,
Yordan

0 lding over 8 years ago in reply to Yordan Kovachev

TI__Guru* 95265 points

Hi,

For the latest Processor SDK Linux, there are the modules we supported: processors.wiki.ti.com/.../Processor_SDK_Linux_Software_Developer’s_Guide

OpenMP is not supported anymore. You may look at IPC with rpmsg for inter-processor communication.

Regards, Eric

0 Gergo Horvath over 8 years ago in reply to lding

Prodigy 20 points

Hi Eric!

Thank for your answer!
By what I see on the IPC wiki page, it looks like IPC doesn't support HyperLink.
Does this mean, that HyperLink is not supported under Linux?

Best regards,
Gergo

0 lding over 8 years ago in reply to Gergo Horvath

TI__Guru* 95265 points

Hi,

We only have Hyperlink under MCSDK Linux: processors.wiki.ti.com/.../MCSDK_UG_Chapter_Developing_Transports

It is not maintained in Processor SDK Linux.

Regards, Eric

Processors

Processors forum

Linux/66AK2H14: What is the current recommended way of using Hyperlink under Linux?