Hi,
Whether DM365 is capable of simultaneous encoding and decoding of 720P
H.264/MPEG video in a realtime scenario?
If yes, any supports are available in latest DVSDK?
If no, whether DM368 is capable of that?
Thanks
tvs
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Whether DM365 is capable of simultaneous encoding and decoding of 720P
H.264/MPEG video in a realtime scenario?
If yes, any supports are available in latest DVSDK?
If no, whether DM368 is capable of that?
Thanks
tvs
Hi,
DM365 cannot do H.264 720P encode+decode.
But DM368 can do 720P encode and decode for H.264. However, the decoder would be closed loop decoder.
regards
Yashwant
Hi tvs,
The decoder indeed supports 720P universal, but the performance may not reach upto 720P@30fps encode + decode for all the streams.
Since the performance of universal decoder varies quite a lot, can you tell us whcih type of stream do you expect to be decoded ?
The latest codecs are available at - http://software-dl.ti.com/dsps/dsps_public_sw/codecs/DM365/index_FDS.html
regards
Yashwant
DM365 cannot do 720P@30 Mpeg4 encode and decode. If you are looking for closed loop decoder, then DM368 (432Mhz) should just be able to do it using MJCP codec. If you are looking for universal decode(capacity to decode streams from any source), then DM368 also cannot do full duplex mpeg4 720P.
regards
Yashwant
Thank you very much for the information. We have the board for the DM368, but we were hoping to be able to use the DM365 as a less expensive alternative.
Thank you,
Brent