OMAP L1x USB 2.0 Throughput

William Shaffer

Hello,
I am considering using the OMAP L1x in a new design but I was wondering if anyone has done any kind of benchmarking with the high speed USB 2.0 to determine what the typical maximum throughput is...any comments would be appreciated.

Thanks,
Will

over 15 years ago

0 Bernie Thompson TI over 15 years ago

TI__Mastermind 41665 points

Since this is basically the same question/answer as your other thread, I wanted to link that in https://e2e.ti.com/support/dsp/sitara_arm174_microprocessors/f/47/t/64467.aspx

Basically you want to look at the release notes for whatever board support software you are using (i.e. your Linux drivers) as the performance is dependent on how the driver software handles the hardware.

0 William Shaffer over 15 years ago in reply to Bernie Thompson TI

Intellectual 335 points

Yes, it is...thanks again.

Processors

Processors forum

OMAP L1x USB 2.0 Throughput