BEAGLEBK: UART0 on expansion headers

vinaya shree

Part Number: BEAGLEBK

hi
I am using beaglebone black ,but due to insertion of cape on board i am not able to use 6 pin header j1 for serial debug.May i know which pins in p8 and p9 headers corresponds to uart0_tx and uart0_rx.please help me,i know other uarts pin details ,but only uart0 i need.

over 8 years ago

0 Biser Gatchev-XID over 8 years ago

TI__Guru**** 393215 points

Hi,

UART0 is not available on the P8 and P9 headers. What people usually do is either re-solder the 6-pin debug header on the other side of the PCB, or bend the pins so that the debug cable can be inserted under the cape.

0 vinaya shree over 8 years ago in reply to Biser Gatchev-XID

Prodigy 140 points

thanks for the reply,will do one of the above suggested method.

Processors

Processors forum

BEAGLEBK: UART0 on expansion headers