CCS/TDA3XEVM: TDA3 - Debug Session with CCS

Jens G

Part Number: TDA3XEVM

Tool/software: Code Composer Studio

Hi TI-Team,

I have some open questions regarding the debug session of the TDA device. If the SBL is loaded, what is the best way to connect with the debugger and start the debug session. It seems that the GEL file device init is in conflict with the SBL and the target connection result in an error.

Thanks and best regards,

Jens

over 7 years ago

0 Alex Bashkov over 7 years ago

TI__Genius 13650 points

Jens,

Have you enabled #define VISION_SDK_CONFIG 1?

Thanks
Alex

0 Rishabh Garg over 7 years ago

TI__Guru 55685 points

Hi Jens,

In addition to what Alex said, in case you want to debug SBL or use SBL for SOC Init you have to remove gel files from your target configuration.
Steps: Click on IPU1_0 -> Select "Open Gel File View" -> Remove all from Gel File Window.

Regards,
Rishabh

Processors

Processors forum

CCS/TDA3XEVM: TDA3 - Debug Session with CCS