Linux/OMAP-L138: How to install linux to Nand flash and boot linux from Nand flash

Yuehai Zhou

Part Number: OMAP-L138
Other Parts Discussed in Thread: OMAPL138

Tool/software: Linux

Hi everyone,

I am using OMAPL138LCDK evaluation board. I want to install linux and boot linux from nandflash. Do you have any website tutorials or video tutorials?

Thank you very much.

Ruddy.

over 7 years ago

0 Yordan Kovachev over 7 years ago

TI__Guru**** 161600 points

Hi Ruddy,

See this wiki:
processors.wiki.ti.com/.../Linux_Core_U-Boot_User's_Guide

Best Regards,
Yordan

0 Yuehai Zhou over 7 years ago in reply to Yordan Kovachev

Prodigy 170 points

Hi Yordan,

Has been the u-boot burnt in the Nandflash when I buy the OMPL138LCDK? And is the linux kernel image stored in the SD partition? if not, where can I download the u-boot, filesystem and kernel image ? Thank you.

Best regards.

Ruddy.

0 Yuehai Zhou over 7 years ago in reply to Yuehai Zhou

Prodigy 170 points

Hi Yordan,

Can I flash u-boot to nandflash by jtag or uart for OMAPL138, do you have any turtorials. Thank you!

Ruddy

0 Yordan Kovachev over 7 years ago in reply to Yuehai Zhou

TI__Guru**** 161600 points

See these wikis:
processors.wiki.ti.com/.../Serial_Boot_and_Flash_Loading_Utility_for_OMAP-L138
processors.wiki.ti.com/.../AM18x_Flash_Tool_User's_Guide

Best Regards,
Yordan

Processors

Processors forum

Linux/OMAP-L138: How to install linux to Nand flash and boot linux from Nand flash