OMAP-L138: want to integrate usb(cdc) in bootloader

Antony George

Prodigy 170 points

Part Number: OMAP-L138

is it possible to integrate usb(CDC) in bootloader to function it as a virtual com port ? if yes how ?

regards

Antony

over 8 years ago

0 Yordan Kovachev over 8 years ago

TI__Guru**** 161600 points

Hi,

Which SDK version are you using?

Best Regards,
Yordan

0 Antony George over 8 years ago in reply to Yordan Kovachev

Prodigy 170 points

hi
im new to these stuffs, so could you plese tell me how to identify which sdk im using.

im using library from starterware.

Regards
Antony

0 Yordan Kovachev over 8 years ago in reply to Antony George

TI__Guru**** 161600 points

Hi Antony,

When you connect your board to your PC (through serial console) you can see the bootlog.
Just copy the boot log and share it here. This will be enough for me.

Otherwise, you can tell which SDK are you using by the sources you've downloaded. The latest one is located here:
www.ti.com/.../processor-sdk-omapl138

Do you use these or some previous one. For example for quite a while the linux bootloader, called u-boot, allready has the usb commands integrated in it.

Best Regards,
Yordan

Processors

Processors forum

OMAP-L138: want to integrate usb(cdc) in bootloader