CCS/OMAP-L138: TMS320C6748

Vishwas dg

Part Number: OMAP-L138
Other Parts Discussed in Thread: TMS320C6748

Tool/software: Code Composer Studio

"POWER FAILURE ON TARGET CPU"

I am using TMS320C6748 for correlating two images.

When i call 'correlation' asm code from c code in ccs studio , at the point where i call the asm code the execution stops and the reason is POWER FAILURE IN TARGET CPU.

Plz help

Regards,

Vishwas

over 8 years ago

0 Cvetolin Shulev-XID over 8 years ago

TI__Guru 65405 points

The team is notified. They will post their feedback directly here.

BR
Tsvetolin Shulev

0 Sahin Okur over 8 years ago

TI__Mastermind 27355 points

Hi Vishwas,

Do you experience the power failure when running one of our examples, or does it only occur with this particular code?

You may also want to try isolating the power between your PC and board or emulator. See the following E2E threads that discuss this: e2e.ti.com/.../237108
e2e.ti.com/.../510288

0 Vishwas dg over 8 years ago in reply to Sahin Okur

Prodigy 30 points

Thanks for the reply Sahin Okur,
I tried isolating power but still the problem isn't resolved.
i have used nested loops in my ASM code , is that a reason for this issue?

0 Sahin Okur over 8 years ago in reply to Vishwas dg

TI__Mastermind 27355 points

Hi Vishwas,

Which board are you using? Can you share your code so that I can try reproducing this on my end?

Processors

Processors forum

CCS/OMAP-L138: TMS320C6748