Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed the week of November 23.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RTOS: Two camera usecase- display in two different pipeline

Tool/software: TI-RTOS

Hi all

 

We are using dra7xx customized board & VSDK 3 dot 1 version.

 We have adv7182 video decoder  in the capture side. We want to capture two parallel  video data and show in two different pipeline.

 How to define the usecase ? Do you have any sample usecase for the same ?

 

We have already tested the below usecase.

UseCase: chains_vipSingleCam_SgxDisplay

 

 

Capture -> Display_M4 (IPU1_0)

Regards,

Gokul

  • Gokul,

    You could use two different display pipelines and display two VIP captured frames side by side..

    Regards,
    Brijesh
  • Essentially, you could have usecase like below

    capture -> dup -> select -> Display_0
    -> select -> Display_1

    In the select link, you could select one of the input channel. In the display parameters, you could select the position at which you want to display this channel.

    Rgds,
    Brijesh
  • Hi Brijesh,

    We have two adv7182 video decoder connected to two different VIP ports. How will be the use-case be defined ?

    Do you have any sample examples for the same ?

    Regards,
    Gokul
  • Hi Gokul,

    We dont have example exactly for this decoder/usecase. But there are some similar usecases. For example, SRV calibration usecase, captures 4 channels over VIP, does mosaic of 4 frames using VPE and SWMS and then displays it.
    In your case, there are only two channels from the capture, so you could use VPE to down scale it to half, then select appropriate channels to connect to the display links. Display links will finally display them side by side.

    Capture -> VPE -> dup -> select -> Display_0
    -> select -> Display_1

    Regards,
    Brijesh