TMDSEVM572X: Reference design file issue

Ruthwik Sameera

Part Number: TMDSEVM572X

Hi,

I am trying to open the reference design PCB file of TMDSEVM572X. It couldn't open in eagle. Could you please let me know which software should be used open the .brd file? Specifically "TI_AM572x_PM_RevA3.brd" "TI_AM572x_LM_RevA3.brd"

Also what does the LM and PM mean in the file name?

Thank you.

over 8 years ago

0 Biser Gatchev-XID over 8 years ago

TI__Guru**** 393215 points

Hi,

This PCB file is in Cadence Allegro format.

0 Biser Gatchev-XID over 8 years ago in reply to Biser Gatchev-XID

TI__Guru**** 393215 points

PM = Processor board
LM = LCD board

0 Ruthwik Sameera over 8 years ago in reply to Biser Gatchev-XID

Prodigy 30 points

Thank you for the information. I do not have the license for Allegro, is there anyway I can get the board file for Eagle or PADS?

0 Biser Gatchev-XID over 8 years ago in reply to Ruthwik Sameera

TI__Guru**** 393215 points

No, these formats are not available. The board PCB layout has been done in Allegro, and this is verified by production boards. The established TI practice is to publish only verified layouts. You can find a free Allegro viewer here: www.cadence.com/.../allegro-downloads-start.html

0 Ruthwik Sameera over 8 years ago in reply to Biser Gatchev-XID

Prodigy 30 points

Thank you.

Processors

Processors forum

TMDSEVM572X: Reference design file issue