Tool/software: Linux
Hello ,
I have designed a custom board with AM3358 similar to the AM335x general purpose EVM.
Now I have a requirement of writing I2S protocol on the SPI0 .
Kindly someone help me at the earliest.
Regards
Mad_hu
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software: Linux
Hello ,
I have designed a custom board with AM3358 similar to the AM335x general purpose EVM.
Now I have a requirement of writing I2S protocol on the SPI0 .
Kindly someone help me at the earliest.
Regards
Mad_hu
Hello Biser,
I didn't get what you meant to say.
We can use I2S protocol on McASP0 and which was there already in the ti SDK. Now my concern is how to configure that on the MCSPI.
Regards
Mad_hu
MADHU GANDEPALLI said:Now I have a requirement of writing I2S protocol on the SPI0 .
This is what you posted. Besides you have another thread opened for this, so I am closing this one now.
There is an MSP430 app note that looked at doing I2S with 2 SPI's.
www.ti.com/.../slaa449a.pdf
But there are limitations like 16-bit L/R channels..
You could look at the concept. But would have to right the code on your own.