RTOS/66AK2H14: Can use SYS BIOS to process data from 10 Gb ethernet

Hieu Le96

Part Number: 66AK2H14
Other Parts Discussed in Thread: SYSBIOS

Tool/software: TI-RTOS

Hi,

I have a evm 66AK2H16 board, I want to connect it with another board to receive data by 10 Gbits ethernet. Can I use SYS BIOS to receive data and process it? Can you give me some introductions to do this?

thanks you very much

over 8 years ago

0 Yordan Kovachev over 8 years ago

TI__Guru**** 161600 points

Hi,

Yes, you can use the SYS BIOS (part of processor sdk rtos) to connect two boards via 10Gbits ethernet.
Have a look at the NDK, which is part of the Processor SDK RTOS (www.ti.com/.../processor-sdk-k2h):
processors.wiki.ti.com/.../Processor_SDK_RTOS_Software_Developer_Guide
See the Networ & EMAC links:
processors.wiki.ti.com/.../Processor_SDK_RTOS_NDK
processors.wiki.ti.com/.../Processor_SDK_RTOS_EMAC

Best Regards,
Yordan

0 Hieu Le96 over 8 years ago in reply to Yordan Kovachev

Prodigy 50 points

thanks for your support!

e2e.ti.com/.../432645
I found this post in 2015 said that: We do not have 10G support in SYS/BIOS. Can you verify this information?

brgs Hieu

0 Yordan Kovachev over 8 years ago in reply to Hieu Le96

TI__Guru**** 161600 points

Let me check further... I think this has been added, but let me confirm with the design team.

Best Regards,
Yordan

0 lding over 8 years ago in reply to Yordan Kovachev

TI__Guru* 95265 points

Hi,

We don't have 10GbE driver in SYSBIOS, only available is in Linux.

Regards, Eric

Processors

Processors forum

RTOS/66AK2H14: Can use SYS BIOS to process data from 10 Gb ethernet