• State Resolved
  • Locked Locked
  • Replies 5 replies
  • Subscribers 99 subscribers
  • Views 352 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Only OSD

Mehmet Ugursoy
Prodigy 210 points

Other Parts Discussed in Thread: TVP7002

 

 

I want to make OSD on live Video Signal , Video Signal can be various format  (HD 720p - 1080i - 1080p ) . Im not using any encoding and decoding processing. 

So ,  What is my maximum input resolution on this setup ?


  • 0
    TI__Genius 14405 points

    Are you asking about the max resolution for OSDWIN0? First of all, the supported scenario is that it needs to be inside VIDWIN0.

    What is the format of OSDWIN0? RGB? or BMP? If RGB, you will not be able to do HD.

  • 0 in reply to Paul.Yin
    Prodigy 210 points

     

    I m not enough information about dm36x , so i cant answer your question , but i can explain my question.

     

    Think like that,  i have 1080p 30fps  input signal ,this signal coming from YPbPr Connection i(i gonna use TVP7002 for this part) , and i want to put osd menu  on this signal.  So , Can i do like that application with dm365 or dm368, or any processor do you suggest to me?

     

     

  • 0 in reply to Mehmet Ugursoy
    TI__Genius 14405 points

    Is your OSD menu also 1080P? or the menu itself is only a stripe on top of the actual video?

    If only stripe, then DM368 should be doable. But you need to get yourself familiar with the device first.

  • 0 in reply to Paul.Yin
    Prodigy 210 points

     

     

    Thanks for Answer. But, i dont think like you ,if everyone working on their familiar devices, why the TI works hard for develop new product. Please think twice when writing  your answer.

  • 0 in reply to Mehmet Ugursoy
    TI__Genius 14405 points

    Sorry about the confusion. You misunderstood what I meant.

    What I meant to say is that, if your OSD window doesn't have to cover the entire screen, and is only a horizontal or vertical bar, then DM36x MIGHT BE OK. Otherwise, it might not suit your need. However, since you stated you didn't know detail about the product, you need to understand the detail, at least about the VPBE, before knowing for sure if it works for you.