• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 99 subscribers
  • Views 269 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Linux/AM5728: USB Hub downstream link

Anil Medak
Intellectual 430 points

Part Number: AM5728

Tool/software: Linux

Hi Ti,

Is it possible to check usb down stream link is established or not when device is connected to hub, If so please suggest me to do.

Thanks,

Anil

  • 0
    TI__Guru**** 177121 points
    Anil,

    I think this question is too broad. Depending on what the problem symptom is and where to look at the issue, there are many things to check.

    If AM5728 USB in host mode enumerated the hub, but not any device attached to the hub downstream port, that is the design problem on your board related to the hub, unfortunately this forum only supports Sitara processors, we are unable to provide further comments related to hub design.