• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 99 subscribers
  • Views 219 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DVEVM hangs when CCS is opened

Jayakrishnan
Expert 2790 points

Hi All,
I want to check the target memory contents through CCS view-> memory option. But my DVEVM target linux hangs when I open CCS.
How to avoid this?  What is meant by unlocking DSP? How to do this? Pls clarify
Regards
Jayakrishnan

  • 0
    TI__Mastermind 41665 points

    In general CCS is not Linux aware and is not very suitable for debugging anything with Linux involved, as you have found it tends to have a bad impact on Linux. The only place I have seen CCS being used while Linux is running is with OMAP3 as discussed in this wiki article, however I am not sure if similar steps with regard to connecting to CCS will allow you to achieve this on the DVEVM or not.